To remove and install, fuse or other parts, or do not use computer lights, to cut off the exchange and overload and ground protection.

Computer lights can not be exposed to rain or tidal wetlands.

UV (UV) radiation and bulb explosion

Computer lights must not be used when the lens and cover are missing or damaged.

When replacing the bulb, open the outer cover or remove the bulb, and let the computer light cool for at least 15 minutes. Wear gloves and safety glasses to protect your hands and eyes.

No direct light bulbs.

If damaged, worn or in bulb than life before replacement.

Fire prevention

Do not short circuit temperature control switch and fuse, fuse must be replaced with the same model.

At least 1 meters away from combustible material (such as fabric, wood, paper).

Computer lights from the lighting surface shall not be less than 1 meters.

At least 0.1 meters of space around the cooling and ventilation system.

There must be no shelter in front of the camera.

The surface of the computer will be very hot, and it should be cool for at least 5 minutes before it is processed.

Never modify the computer lights or install non night sun accessories.

The ambient temperature is not more than 40 degrees Celsius can not turn on the computer lights.

Falling injury prevention

You can't carry a computer light alone.

Hanging installation, to ensure that the lamp frame can withstand 10 times the weight of all computer light.

Make sure all the outer cover and mounting parts are stable, and use the safety rope.

When installing or removing the computer light, the work area is to prevent outsiders from entering.